Pressure Reducing Support Surfaces - Group 2

For any item to be covered by Medicare, it must 1) be eligible for a defined Medicare benefit category, 2) be reasonable and necessary for the diagnosis or treatment of illness or injury or to improve the functioning of a malformed body member, and 3) meet all other applicable Medicare statutory and regulatory requirements.

The purpose of a Local Coverage Determination (LCD) is to provide information regarding “reasonable and necessary” criteria based on Social Security Act § 1862(a)(1)(A) provisions.

In addition to the “reasonable and necessary” criteria contained in this LCD there are other payment rules, which are discussed in the following documents, that must also be met prior to Medicare reimbursement:

• The LCD-related Standard Documentation Requirements Article, located at the bottom of this policy under the Related Local Coverage Documents section.
• The LCD-related Policy Article, located at the bottom of this policy under the Related Local Coverage Documents section.
• Refer to the Supplier Manual for additional information on documentation requirements.
• Refer to the DME MAC web sites for additional bulletin articles and other publications related to this LCD.

For the items addressed in this LCD, the “reasonable and necessary” criteria, based on Social Security Act § 1862(a)(1)(A) provisions, are defined by the following coverage indications, limitations and/or medical necessity.

A group 2 support surface is covered if the beneficiary meets at least one of the following three Criteria (1, 2 or 3):

1. The beneficiary has multiple stage 2 pressure ulcers located on the trunk or pelvis (refer to the ICD-10 code list section in the LCD-related Policy Article for applicable diagnoses) which have failed to improve over the past month, during which time the beneficiary has been on a comprehensive ulcer treatment program including each of the following:
   1. Use of an appropriate group 1 support surface, and
   2. Regular assessment by a nurse, practitioner, or other licensed healthcare practitioner, and
   3. Appropriate turning and positioning, and
   4. Appropriate wound care, and
   5. Appropriate management of moisture/incontinence, and
   6. Nutritional assessment and intervention consistent with the overall plan of care
2. The beneficiary has large or multiple stage 3 or 4 pressure ulcer(s) on the trunk or pelvis (refer to the ICD-10 code list section in the LCD-related Policy Article for applicable diagnoses),
3. The beneficiary had a myocutaneous flap or skin graft for a pressure ulcer on the trunk or pelvis within the past 60 days (refer to the ICD-10 code list section in the LCD-related Policy Article for applicable diagnoses), and has been on a group 2 or 3 support surface immediately prior to discharge from a hospital or nursing facility within the past 30 days

If the beneficiary is on a group 2 surface, there should be a care plan established by the treating practitioner or home care nurse which includes the above elements. The support surface provided for the beneficiary should be one in which the beneficiary does not "bottom out" (see Appendices section).

When a group 2 surface is covered following a myocutaneous flap or skin graft, coverage generally is limited to 60 days from the date of surgery.

When the stated coverage criteria for a group 2 mattress or bed are not met, a claim will be denied as not reasonable and necessary.

A support surface which does not meet the characteristics specified in the Coding Guidelines section of the Pressure Reducing Support Surfaces – Group 2 Policy Article will be denied as not reasonable and necessary. (See Policy Article sections concerning billing of E1399.)

Continued use of a group 2 support surface is covered until the ulcer is healed, or if healing does not continue, there is documentation in the medical record to show that: (1) other aspects of the care plan are being modified to promote healing, or (2) the use of the group 2 support surface is reasonable and necessary for wound management.

Appropriate use of the KX modifier (see Modifier section in the related Policy Article) is the responsibility of the supplier. The supplier should maintain adequate communication on an ongoing basis with the clinician providing the wound care in order to accurately determine that use of the KX modifier still reflects the clinical conditions which meet the criteria for coverage of a group 2 support surface, and that adequate documentation exists in the medical record reflecting these conditions. Such documentation should not be submitted with a claim but should be available upon request.

GENERAL

A Standard Written Order (SWO) must be communicated to the supplier before a claim is submitted. If the supplier bills for an item addressed in this policy without first receiving a completed SWO, the claim shall be denied as not reasonable and necessary.

For Durable Medical Equipment, Prosthetics, Orthotics and Supplies (DMEPOS) base items that require a Written Order Prior to Delivery (WOPD), the supplier must have received a signed SWO before the DMEPOS item is delivered to a beneficiary. If a supplier delivers a DMEPOS item without first receiving a WOPD, the claim shall be denied as not reasonable and necessary. Refer to the LCD-related Policy Article, located at the bottom of this policy under the Related Local Coverage Documents section.

For DMEPOS base items that require a WOPD, and also require separately billed associated options, accessories, and/or supplies, the supplier must have received a WOPD which lists the base item and which may list all the associated options, accessories, and/or supplies that are separately billed prior to the delivery of the items. In this scenario, if the supplier separately bills for associated options, accessories, and/or supplies without first receiving a completed and signed WOPD of the base item prior to delivery, the claim(s) shall be denied as not reasonable and necessary.

An item/service is correctly coded when it meets all the coding guidelines listed in CMS HCPCS guidelines, LCDs, LCD-related Policy Articles, or DME MAC articles. Claims that do not meet coding guidelines shall be denied as not reasonable and necessary/incorrectly coded.

Proof of delivery (POD) is a Supplier Standard and DMEPOS suppliers are required to maintain POD documentation in their files. Proof of delivery documentation must be made available to the Medicare contractor upon request. All services that do not have appropriate proof of delivery from the supplier shall be denied as not reasonable and necessary.

NA

NA

DOCUMENTATION REQUIREMENTS

Section 1833(e) of the Social Security Act precludes payment to any provider of services unless "there has been furnished such information as may be necessary in order to determine the amounts due such provider." It is expected that the beneficiary’s medical records will reflect the need for the care provided. The beneficiary’s medical records include the treating practitioner’s office records, hospital records, nursing home records, home health agency records, records from other healthcare professionals and test reports. This documentation must be available upon request.

GENERAL DOCUMENTATION REQUIREMENTS

In order to justify payment for DMEPOS items, suppliers must meet the following requirements:

• SWO
• Medical Record Information (including continued need/use if applicable)
• Correct Coding
• Proof of Delivery

Refer to the LCD-related Standard Documentation Requirements article, located at the bottom of this policy under the Related Local Coverage Documents section for additional information regarding these requirements.

Refer to the Supplier Manual for additional information on documentation requirements.

Refer to the DME MAC web sites for additional bulletin articles and other publications related to this LCD.

POLICY SPECIFIC DOCUMENTATION REQUIREMENTS

Items covered in this LCD have additional policy-specific requirements that must be met prior to Medicare reimbursement.

Refer to the LCD-related Policy article, located at the bottom of this policy under the Related Local Coverage Documents section for additional information.

Miscellaneous

Appendices

The staging of pressure ulcers used in this policy is as follows (National Pressure Injury Advisory Panel, 2019 Revision):

Stage 1 Pressure Injury: Non-blanchable erythema of intact skin
Intact skin with a localized area of non-blanchable erythema, which may appear differently in darkly pigmented skin. Presence of blanchable erythema or changes in sensation, temperature, or firmness may precede visual changes. Color changes do not include purple or maroon discoloration; these may indicate deep tissue pressure injury.

Stage 2 Pressure Injury: Partial-thickness skin loss with exposed dermis
Partial-thickness loss of skin with exposed dermis. The wound bed is viable, pink or red, moist, and may also present as an intact or ruptured serum-filled blister. Adipose (fat) is not visible and deeper tissues are not visible. Granulation tissue, slough and eschar are not present. These injuries commonly result from adverse microclimate and shear in the skin over the pelvis and shear in the heel. This stage should not be used to describe moisture associated skin damage (MASD) including incontinence associated dermatitis (IAD), intertriginous dermatitis (ITD), medical adhesive related skin injury (MARSI), or traumatic wounds (skin tears, burns, abrasions).

Stage 3 Pressure Injury: Full-thickness skin loss
Full-thickness loss of skin, in which adipose (fat) is visible in the ulcer and granulation tissue and epibole (rolled wound edges) are often present. Slough and/or eschar may be visible. The depth of tissue damage varies by anatomical location; areas of significant adiposity can develop deep wounds. Undermining and tunneling may occur. Fascia, muscle, tendon, ligament, cartilage and/or bone are not exposed. If slough or eschar obscures the extent of tissue loss this is an Unstageable Pressure Injury.

Stage 4 Pressure Injury: Full-thickness skin and tissue loss
Full-thickness skin and tissue loss with exposed or directly palpable fascia, muscle, tendon, ligament, cartilage or bone in the ulcer. Slough and/or eschar may be visible. Epibole (rolled edges), undermining and/or tunneling often occur. Depth varies by anatomical location. If slough or eschar obscures the extent of tissue loss this is an Unstageable Pressure Injury.

Unstageable Pressure Injury: Obscured full-thickness skin and tissue loss
Full-thickness skin and tissue loss in which the extent of tissue damage within the ulcer cannot be confirmed because it is obscured by slough or eschar. If slough or eschar is removed, a Stage 3 or Stage 4 pressure injury will be revealed. Stable eschar (i.e. dry, adherent, intact without erythema or fluctuance) on the heel or ischemic limb should not be softened or removed.

Deep Tissue Pressure Injury: Persistent non-blanchable deep red, maroon or purple discoloration Intact or non-intact skin with localized area of persistent non-blanchable deep red, maroon, purple discoloration or epidermal separation revealing a dark wound bed or blood filled blister. Pain and temperature change often precede skin color changes. Discoloration may appear differently in darkly pigmented skin. This injury results from intense and/or prolonged pressure and shear forces at the bone-muscle interface. The wound may evolve rapidly to reveal the actual extent of tissue injury, or may resolve without tissue loss. If necrotic tissue, subcutaneous tissue, granulation tissue, fascia, muscle or other underlying structures are visible, this indicates a full thickness pressure injury (Unstageable, Stage 3 or Stage 4). Do not use DTPI to describe vascular, traumatic, neuropathic, or dermatologic conditions.

Bottoming out is the finding that an outstretched hand can readily palpate the bony prominence (coccyx or lateral trochanter) when it is placed palm up beneath the undersurface of the mattress or overlay and in an area under the bony prominence. This bottoming out criterion should be tested with the beneficiary in the supine position with their head flat, in the supine position with their head slightly elevated (no more than 30 degrees), and in the side lying position.

Utilization Guidelines

Refer to Coverage Indications, Limitations and/or Medical Necessity

NA